Making your Wireless Network Secure
Access Points are usually installed on your LAN, behind any router or firewall you may be using. If someone successfully connects to your Access Point, they'll be on your LAN, just like any of your other clients. But since they'll be using TCP/IP to make the connection, you can easily deny access to MS File and Printer sharing by using a protocol other than TCP/IP for those services. That way, they may get access to your network connection, but they won't get access to your files!
Enable WEP encryption and use a non-obvious encryption key. Look for and use products that support 128bit WEP.
Some products allow you to separately set the Authentication method to "Shared Key" or "Open System". Use the "Shared Key" method so that encryption is used to both authenticate your client and encrypt its data.
While the limitations that some wireless client utilities have don't help (hexadecimal only support, single keys, forgetting keys, etc.), don't make it easy for potential snoops to get onto your LAN by using simple keys like 123456, all ones, etc. Changing the keys periodically is more difficult, because it requires sending out information about the new keys to users and that can be a security problem in itself. But changing keys periodically can help keep your LAN secure, so consider getting a procedure into place to do it.
Your router or Access Point should require a password to access its Admin. features.
Unfortunately, this feature is usually only present in "Enterprise-grade" Access Points, and shuts off the ability to administer your Access Point from wireless clients. But if your router / Access Point has it, use it!
Previously available only on "Enterprise-grade" products, many routers and Access Points are being upgraded to have the ability to control the clients that can use them. MAC addresses are tied to physical network adapters, so using this method requires a little coordination and maybe a little inconvenience for LAN users. And MAC addresses can be "spoofed" or imitated/copied, so it's not a guarantee of security. But it adds another hurdle for potential intruders to jump. If you already have a product that doesn't include this feature, check your Manufacturer's Web site for a firmware upgrade.
ORiNOCO and Apple call the ability to stop their products from sending out the network ESSID the "closed network" feature. Other manufacturers are adding this ability, so check your Manufacturer's Web site for a firmware upgrade. Note that the feature doesn't have a consistent name, so check your product's documentation.
ORiNOCO and Apple's "closed network" feature also won't accept connections from clients using the default "ANY" ESSID. Other manufacturers' products have the ability to not accept clients with an "ANY" ESSID, but you'll need to check your product's documentation, since there's not a consistent name for the feature.
Of course, if you really don't want to take chances with your data, then you should run a VPN tunnel over your wireless connection, too. You may take a through put hit, but isn't your data's security worth it?* ESSID "Extended Service Set ID." The ESSID is the identifying name of a wireless network - strictly it is the identifying name of a wireless access point.
Mas200 Accounting Software | Audio & Video Accessories | Cable Assemblies Copper & Fiber | Products for computer applications | Communication, Telephone & Cell Phone Accessories | Cable Installation Products | Raw Cable, Connectors & Parts | Power Accessories including UPS, Surge Protectors, and Adapters | Tools & Testers | Wire (Raw Cable)
All contents Copyright © 1996-2017. All Rights Reserved.